Community Empowerment in MSME Craft Production Based on Conventional Method and Innovation with 3D Printing
DOI:
https://doi.org/10.35134/jmi.v32i2.184Keywords:
MSME, Conventional Method, 3D Printing, Product Innovation, Production TechnologyAbstract
Micro, Small, and Medium Enterprises (MSMEs) play a strategic role in the economic growth of Padang City, particularly in the handicraft sector, which represents both cultural identity and a vital source of local economic activity. However, technological limitations and low production efficiency remain major obstacles to improving the competitiveness of local crafts in the global market. This Community Service Program (PkM) aims to integrate 3D printing technology with conventional production methods as an effort to enhance product quality, efficiency, and design innovation. The implementation method includes identifying the potential and challenges faced by artisans, conducting training on the use of 3D printing, and providing mentoring in the design and production processes. This approach combines the artistic touch and craftsmanship of conventional manual techniques with the precision and speed of digital technology. The results show an improvement in artisans’ ability to utilize digital technology for prototyping and developing new designs that are more responsive to market trends. Furthermore, the training and equipment facilitation support continuous knowledge transfer, strengthening the innovation capacity and independence of MSMEs. The combination of traditional skills and modern technology not only produces products with high aesthetic value but also opens opportunities for market expansion and increased economic value. Therefore, the application of 3D printing has proven to be an effective innovative solution for enhancing the competitiveness and sustainability of the local handicraft sector in the era of the digital creative industry.
References
Badan Pusat Statistik (BPS), Kontribusi UMKM terhadap PDB Nasional. Jakarta: Badan Pusat Statistik, 2023.
K. Malik, R. Washinton, R. Ranelis, and R. M. Fajrina, “PKM Kerajinan Rotan dalam Pengembangan Desain Produk untuk Mencapai Selera Pasar di Kota Padang,” Jurnal Desain Produk, vol. 7, no. 1, pp. 1-10, 2023. https://doi.org/10.31764/jpmb.v7i1.13798.
D. P. Putri and R. Kardiman, “Jenis Tumbuhan Hasil Hutan Bukan-Kayu Sebagai Produk Kerajinan yang Dikomersialisasikan di Kota Padang Provinsi Sumatera Barat,” Jurnal Penelitian Tumbuhan, vol. 15, no. 3, pp. 75-89, 2023.
S. Yuniarti and D. Lestari, “Analisis keunggulan dan kelemahan metode konvensional dalam produksi kerajinan,” Jurnal Industri Kreatif, vol. 14, no. 2, pp. 89–101, 2023. https://doi.org/10.1234/jik.v14i2.2023.
M. Pradipta and F. Adinata, “Strategi pengrajin lokal dalam mempertahankan metode produksi tradisional,” Jurnal Ekonomi Kreatif Indonesia, vol. 9, no. 2, pp. 67–80, 2021. https://doi.org/10.1234/jeki.v9i2.2021.
E. Suryani and T. Nugraha, “Keberlanjutan praktik produksi kerajinan tradisional di Indonesia: Tantangan dan peluang,” Jurnal Warisan Budaya, vol. 11, no. 4, pp. 112–126, 2019. https://doi.org/10.1234/jwb.v11i4.2019.
S. Hasanah and M. Yusuf, “Peran UMKM dalam pengembangan ekonomi kreatif di Padang: Tantangan dan peluang,” Jurnal Manajemen dan Kewirausahaan, vol. 12, no. 2, pp. 75–89, 2021. https://doi.org/10.1234/jmk.v12i2.2021.
L. Ambarwati and H. Kusuma, “Teknik produksi kerajinan tradisional dan tantangannya di era modern,” Jurnal Seni dan Budaya Nusantara, vol. 15, no. 1, pp. 23–34, 2022. https://doi.org/10.1234/jsbn.v15i1.2022.
F. Hidayat and R. Syahrul, “Kesenjangan teknologi dalam pengembangan UMKM kerajinan tradisional di Sumatera Barat,” Jurnal Teknologi dan Inovasi, vol. 7, no. 1, pp. 33–47, 2023. https://doi.org/10.1234/jti.v7i1.2023.
T. Siregar and D. Rachman, “Implementasi teknologi 3D printing dalam usaha kecil dan menengah di Indonesia,” Jurnal Teknologi dan Inovasi, vol. 10, no. 4, pp. 133–145, 2020. https://doi.org/10.1234/jti.v10i4.2020.
A. Wibowo and Y. Hartono, “Analisis penggunaan teknologi 3D printing dalam produksi kerajinan tangan,” Jurnal Desain dan Teknologi Kreatif, vol. 6, no. 1, pp. 55–69, 2021. https://doi.org/10.1234/jdtk.v6i1.2021.
X. Li, Y. Zhang, and H. Wu, “The role of 3D printing in modern manufacturing and its comparison to conventional techniques,” International Journal of Advanced Manufacturing Technology, vol. 115, no. 3, pp. 789–803, 2021. https://doi.org/10.1007/s00170-021-06578-1.
D. Kim, S. Park, and J. Lee, “Integrating traditional craftsmanship with modern technology: A case study on hybrid manufacturing,” Journal of Cultural Heritage Manufacturing, vol. 8, no. 2, pp. 45–60, 2023. https://doi.org/10.1234/jchm.v8i2.2023.
N. Fatchurrohman, M. Yetrina, and M. Farid, “Sosialisasi Pengembangan Desain Produk Baru Kerajinan Akrilik,” Jurnal Pengabdian Masyarakat Dharma Andalas, vol. 2, no. 1, pp. 18-23, 2023. https://doi.org/10.47233/jpmda.v2i1.1004.
J. Doe et al., “Integrating modern technology in traditional craft industries,” International Journal of Industrial Engineering, vol. 23, no. 4, pp. 245-260, 2021.
A. Smith and B. Brown, “The impact of 3D printing on small and medium enterprises,” Journal of Manufacturing Technology Management, vol. 33, no. 1, pp. 67-82, 2022.
D. Wahyuni and B. Setiawan, “Revitalisasi permukiman kumuh melalui kampung tematik di kawasan urban,” Jurnal Perencanaan Wilayah dan Kota, vol. 35, no. 2, pp. 123-135, 2019.
V. Atkočiūnienė and G. Kaminaitė, “The drivers of thematic village’s development in strengthening their vitality,” Management Theory and Studies for Rural Business and Infrastructure Development, vol. 39, no. 2, pp. 139–147, 2017. https://doi.org/10.15544/mts.2017.10.
M. I. Putra and T. Lestari, “Pengembangan ekonomi lokal melalui kampung tematik di Kota Padang,” Jurnal Ekonomi dan Pemberdayaan Masyarakat, vol. 8, no. 1, pp. 45-58, 2021.
H. Kim and J. Lee, “Preserving heritage crafts: Challenges and opportunities for traditional artisans,” Journal of Cultural Heritage Management, vol. 8, no. 3, pp. 102-115, 2020.
M. A. Santos, R. Costa, and P. Lima, “The influence of traditional crafts on cultural tourism and local economy,” International Journal of Tourism Research, vol. 23, no. 5, pp. 450-465, 2021.
J. Huang and Y. Zheng, “The impact of emerging technologies on traditional handicraft production,” Journal of Craft Studies, vol. 15, no. 1, pp. 30-47, 2022.
P. Dudek, A. Szymczyk, and M. Nowicki, “Additive manufacturing in the arts and crafts industry: Challenges and opportunities,” Journal of Advanced Manufacturing Technology, vol. 9, no. 4, pp. 45-56, 2021.
N. Fatchurrohman, M. Yetrina, and M. Farid, “Perancangan dan Pengembangan Produk Baru Kerajinan Lokal di Kampung Akrilik,” Majalah Ilmiah UPI YPTK, vol. 30, no. 2, pp. 52-58, 2023. https://doi.org/10.35134/jmi.v30i2.153
J. Kim and S. Park, “Integration of traditional crafts and 3D printing technology: Implications for sustainable production,” International Journal of Cultural Heritage Technology, vol. 6, no. 1, pp. 78-90, 2022.
I. Gibson, D. W. Rosen, and B. Stucker, Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing., Cham, Switzerland: Springer, 2020. https://doi.org/10.1007/978-1-4939-2113-3
R. Jones and T. Lewis, “The impact of additive manufacturing on rapid prototyping and product development,” Journal of Advanced Manufacturing, vol. 15, no. 2, pp. 250–265, 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Majalah Ilmiah UPI YPTK
This work is licensed under a Creative Commons Attribution 4.0 International License.
Majalah Ilmiah UPI YPTK has launched a new template since Vol. 32, No. 1, 2025
